A U-tube of uniform cross-section (see figure) is partially filled with a liquid L. 
Another liquid L1 which does not mix with liquid L is poured into one side.
It is found that the liquid levels of two sides of the tube are the same.
While level of liquid L has risen by 2 cm. If the specific gravity of liquid L
is 1.1, the specific gravity of Liquid L1 must be
(a)
(b)
(c)
1.001
(d)
1.0
A U-tube of uniform cross-section (see figure) is partially filled with a liquid L.
Another liquid L1 which does not mix with liquid L is poured into one side.
It is found that the liquid levels of two sides of the tube are the same.
While level of liquid L has risen by 2 cm. If the specific gravity of liquid L
is 1.1, the specific gravity of Liquid L1 must be
(a)
(b)
(c)
1.001
(d)
1.0
Question ID - 152050 | SaraNextGen Top Answer
A U-tube of uniform cross-section (see figure) is partially filled with a liquid L.
Another liquid L1 which does not mix with liquid L is poured into one side.
It is found that the liquid levels of two sides of the tube are the same.
While level of liquid L has risen by 2 cm. If the specific gravity of liquid L
is 1.1, the specific gravity of Liquid L1 must be
(a)
(b)
(c)
1.001
(d)
1.0
|
A U-tube of uniform cross-section (see figure) is partially filled with a liquid L. Another liquid L1 which does not mix with liquid L is poured into one side. It is found that the liquid levels of two sides of the tube are the same. While level of liquid L has risen by 2 cm. If the specific gravity of liquid L is 1.1, the specific gravity of Liquid L1 must be |
|||||||
|
(a) |
|
(b) |
|
(c) |
1.001 |
(d) |
1.0 |