A fillet welded joint is subjected to transverse loading $F$ as shown in the figure. Both legs of the fillets are of $10 \mathrm{~mm}$ size and the weld length is $30 \mathrm{~mm}$. If the allowable shear stress of the weld is $94 \mathrm{MPa}$, considering the minimum throat area of the weld, the maximum allowable transverse load in $k N$ is

(A) 14.44

(B) 17.92

(C) 19.93

(D) 22.16

A fillet welded joint is subjected to transverse loading $F$ as shown in the figure. Both legs of the fillets are of $10 \mathrm{~mm}$ size and the weld length is $30 \mathrm{~mm}$. If the allowable shear stress of the weld is $94 \mathrm{MPa}$, considering the minimum throat area of the weld, the maximum allowable transverse load in $k N$ is

(A) 14.44

(B) 17.92

(C) 19.93

(D) 22.16

1 Answer - 5876 Votes