Updated By SaraNextGen

On April 24, 2024, 11:35 AM

Water Proof Table Cover - Home Made Ideas

I have to confess that as a mom, I struggle a bit with having messy fun and letting go of control over trying to keep things relatively clean at times. It's not that our house is perfectly clean (it's...

• I have to confess that as a mom, I struggle a bit with having messy fun and letting go of control over trying to keep things relatively clean at times. It's not that our house is perfectly clean (it's like really, really far from that usually!), but I still try and keep messy crafts to the outdoors for easier cleanup when possible. That's all fine and good if I can just move an activity outside and we still get to paint cardboard boxes or have a mini car wash (or dinosaur wash—Lola's favorite!), but there's a good six months out of the year here where that's not really possible, so we have to bring the crafts indoors!

• I've been wanting to make a simple waterproof cover for our breakfast nook table for a while now so we could paint/craft in that space with less worrying about the mess and I finally made one! I even added some large piping to the edge of the table cover as a lip to keep paint brushes and markers from rolling off the table constantly, which keeps me from having to fetch a crayon or marker every 20 seconds as they just naturally seem to want to roll onto the floor (and keeps the floor cleaner as well!). While it is a large item to sew, it's still a pretty easy thing to make—I'll show you how to make one, whatever shape table you have!

• Supplies:

• -waterproof fabric* (I used this as I was looking for a more natural waterproof fabric)

• -sewing machine

• -straight pins

• -large piping (I bought 4 yards of this piping)

• -fabric scissors

• *The yardage you'll need will depend on how big your table is! My table is 42″ round and I did a 6″ tall side and had plenty with the two yards I ordered, but not all fabric is the same width so make sure you think about that too.

• First, you'll want to measure the table you'll be covering and add a 1/2″ to each side so you have a 1/2″ seam allowance all around. I added a tiny bit more to my top panel measurement just to make sure it wouldn't be too small for the table, so I would suggest doing that as well. Cut out a piece of cloth those dimensions. My table is relatively small so I just turned it upside down and placed it on top to trace and add 1/2″ around—haha! Then, cut two long strips of fabric to make the side panel that were 7″ wide. You can get a good idea of how long you need your side strip to be by adding up all four side measurements of your square or rectangle table (with that 1/2″ seam allowance included). For a circular table like mine, you can measure the diameter of the table (add 1″ for the 1/2″ seam allowance on both sides) and then multiply that number by 3.14 to find the circumference. Remember that from math class!? I would add 2-3″ to that number to have a little extra and that's how long your side strip will need to be.